Christie Genuine Lens 118-100110-01 HD Fixed is an OEM optical accessory for Christie professional projectors, featuring a short throw ratio of 0.67:1. The official compatibility list covers 50 models, so simply verify the projector model and panel size before installation—no adapter rings are needed. The value of an OEM lens lies not in the extra figures on a specification sheet, but in its factory calibration to the optical path and mount of the projector series. Once installed, image circle coverage, edge illumination, and focus travel all meet their design specifications, eliminating the need to use keystone correction to compensate for image quality.
I. Lens Specifications
| Brand | Christie（Christie） |
| Lens Model | 118-100110-01 HD Fixed |
| Throw Ratio | 0.67:1 |
| Product Type | Short Throw |
| Compatible Models | 50 models |
| Warranty | 12 months; after-sales service is available for damage not caused by users, based on the date on the shipping document |
The above specifications are based on the manufacturer's published specifications. For mechanical dimensions, flange distance, and mount type not shown in the specifications table, please contact us with the projector model for verification. Ordering directly based on a similar model carries the risk that the lens will not fit.
II. Calculating Installation Distance from the Throw Ratio
The throw ratio is the ratio of the installation distance to the image width. This OEM lens has a fixed focal length (0.67:1), so the installation distance varies linearly with image size and offers no adjustment range. Accurate measurements are essential before installation.
| Image Size | Image Width | Required Installation Distance |
|---|---|---|
| 100 inches | 2.15 m | approx. 1.44 m |
| 120 inches | 2.58 m | approx. 1.73 m |
| 150 inches | 3.22 m | approx. 2.16 m |
| 200 inches | 4.30 m | approx. 2.88 m |
These figures represent the clear distance from the front of the lens to the screen and do not include space for rear projector ventilation or cable connections. They are calculated for a 16:10 aspect ratio; actual distances should be confirmed through on-site measurements and the manufacturer's manual.
III. Compatible Models (50 Models)
The following table is based on the manufacturer's compatibility list. Brightness and resolution are populated from the model database; where the data is unavailable, they are marked “—” and no assumptions are made.
| Model | Brightness | Resolution |
|---|---|---|
| Crimson HD25 | — | — |
| Crimson HD31 | — | — |
| Crimson WU25 | — | — |
| Crimson WU31 | — | — |
| DS+10K-J | — | — |
| DS+10K-M | — | — |
| DS+14K-M | — | — |
| DS+6K-M | — | — |
| DS+8K-J | — | — |
| HD10K-M | 10000 lumens | 1920x1080 |
| HD14K-M | 12500 lumens | 1920x1080 |
| HD6K-M | 6600 lumens | 1920x1080 |
| HD7K-J | 6200 lumens | 1920x1080 |
| HD9K-J | 8000 lumens | 1920x1080 |
| Mirage DS+10K-M | — | — |
| Mirage DS+14K-M | — | — |
| Mirage DS+6K-M | — | — |
| Mirage DS+8K-J | — | — |
| Mirage HD10K-M | — | — |
| Mirage HD14K-J | — | — |
| Mirage HD14K-M | — | — |
| Mirage HD16K-J | — | — |
| Mirage HD20K-J | — | — |
| Mirage HD25 | — | — |
| Mirage HD6K-M | — | — |
| Mirage HD7K-J | — | — |
| Mirage S+14K-J | — | — |
| Mirage S+18K-J | — | — |
| Mirage S+22K-J | — | — |
| Mirage WU12K-M | — | — |
| Mirage WU14K-M | — | — |
| Mirage WU20K-J | — | — |
| Mirage WU25 | — | — |
| Mirage WU7K-M | — | — |
| Roadster HD10K-M | — | — |
| Roadster HD14K-J | — | — |
| Roadster HD14K-M | — | — |
| Roadster HD16K-J | — | — |
| Roadster HD20K-J | — | — |
| Roadster S+10K-M | — | — |
| Roadster S+14K-J | — | — |
| Roadster S+14K-M | — | — |
| Roadster S+18K-J | — | — |
| Roadster S+22K-J | — | — |
| Roadster WU12K-M | — | — |
| Roadster WU14K-M | — | — |
| Roadster WU20K-J | — | — |
| WU12K-M | 10500 lumens | 1920x1200 |
| WU14K-M | 12500 lumens | 1920x1200 |
| WU7K-M | 6300 lumens | 1920x1200 |
To determine whether a model outside the list is compatible, send us photos of the projector nameplate and the current lens for verification. Platforms from the same generation often share the same mount, but ordering solely on the basis of a similar model is not worth the risk.
Throw Ratios by Projector Series
When the same 118-100110-01 HD Fixed lens is installed on the series listed below, the nominal throw ratio varies. Select the value that applies to the actual projector series.
| Projector Series | Throw Ratio |
|---|---|
| — | 0.67:1 |
IV. Three Checks Before Replacement
- Confirm the projector panel and resolution.OEM lenses are designed for a specific panel size. With a different panel specification, the image circle cannot cover the full image, resulting in vignetting or edge light loss after installation.
- Calculate the installation distance first.This lens has a nominal throw ratio of 0.67:1. Apply the figures in Section II to the dimensions of your installation site. A fixed-focal-length lens offers no adjustment range, and even a zoom lens requires 10–20 cm of clearance at both ends.
- Verify the mount and locking mechanism.The OEM lens is calibrated to the mount of the relevant projector series. After installation, make sure you hear the lens lock fully into place. A skewed image or blurred edges usually indicate incomplete locking rather than a problem with the lens itself.
If you are unsure, take one photo of the projector nameplate and one of the current lens nameplate and send them to us. Verification against the actual equipment is the most reliable approach.
Request a Solution Consultation
To request lens selection assistance for the OEM 118-100110-01 HD Fixed, project configuration recommendations, or the complete compatibility list from Zorsika, contact us using the following details:
| Contact Phone | 0086-20-38551187 |
| sales@zorsika.com | |
| Working Hours: Monday to Friday 9:00-18:00 | |
The lens model, OEM part number, and compatible projector models in this article are sourced from the manufacturer's compatibility list and the Zorsika product database. The data is continuously updated, and final details are subject to confirmation at the time of quotation.