Barco R9852945 Fixed Short-Throw Lens Guide: Compatible with XDL-4K30 XDL-4K60 XDL-4K75

Barco OEM Lens R9852945 Fixed is an OEM optical accessory for Barco engineering projectors. It is a short-throw lens with a 0.72:1 throw ratio. The official compatibility list covers 3 projector models. Before installation, simply verify the projector model and panel size without resorting to adapter rings. The value of an OEM lens lies not in the additional specifications, but in its factory calibration to the optical path and mount of that model series. Once installed, the image circle, edge illumination, and focusing travel all match their design specifications, eliminating the need to use keystone correction to compensate for image quality.

1. Lens Specifications

Brand	Barco (Barco)
Lens Model	R9852945 Fixed
Throw Ratio	0.72:1
Product Type	Short Throw (Short Throw)
Compatible Projector Models	3 models
Warranty	12 months; damage not caused by user action is eligible for after-sales service, subject to the date on the shipping documentation

The above specifications are subject to the OEM specifications. For mechanical dimensions, flange distance, and mount type not listed in the specifications table, please contact us to verify compatibility based on the projector model. Ordering based solely on a similar model carries the risk of incompatibility.

2. Converting Throw Ratio into Installation Distance

A throw ratio is the ratio of installation distance to image width. This OEM lens is a fixed-focal-length lens (0.72:1), so the installation distance varies linearly with image size, with no adjustment margin. Accurate measurements are essential before installation.

Image Size	Image Width	Required Installation Distance
100 inches	2.15 m	Approx. 1.55 m
120 inches	2.58 m	Approx. 1.86 m
150 inches	3.22 m	Approx. 2.32 m
200 inches	4.30 m	Approx. 3.10 m

The distances above are clear distances from the front face of the lens to the screen and do not account for ventilation or cabling space behind the projector. The figures are calculated for a 16:10 image; actual distances should be confirmed through on-site measurement and in accordance with the OEM manual.

3. Compatible Projector Models (3 models)

The following table is taken from the OEM compatibility list. Brightness and resolution have been entered from the projector model database; unavailable data is shown as “—” and has not been guessed.

Model	Brightness	Resolution
XDL-4K30	29700 lumens	4096x2160
XDL-4K60	59200 lumens	4096x2160
XDL-4K75	72600 lumens	4096x2160

To verify whether a model outside this list is compatible, please send us photos of the projector nameplate and the existing lens. Projectors on the same platform generation often share a mount, but it is not worth placing an order based on a similar model number.

Throw Ratio by Model Series

The nominal throw ratio varies by projector series when the same R9852945 Fixed lens is used. Select the value based on the series of the actual projector.

Model Series	Throw Ratio
—	0.72:1

4. Three Checks Before Replacement

• Confirm the projector's imaging panel and resolution. The OEM lens is designed for a specific panel size. If the panel specifications differ, the image circle cannot cover the panel, resulting in vignetting or edge light loss after installation.
• Calculate the installation distance first. This lens has a nominal throw ratio of 0.72:1; use the table in Section 2 to calculate the distance for your venue. A fixed-focal-length lens offers no adjustment margin, while a zoom lens should still have 10–20 cm of adjustment range at both ends.
• Verify the mount and locking mechanism. The OEM lens is calibrated to the mount on projectors in this series. You must hear it click into the locked position after installation. A skewed image or soft edges are usually caused by incomplete locking, rather than a problem with the lens itself.

If you are unsure, take one photo of the projector nameplate and one of the existing lens nameplate, then send them to us. Verification against the physical units is the safest approach.