Panasonic ET-DLE350 Long Throw Lens: Compatibility with 30 Models

Panasonic original lens ET-DLE350 is an original optical accessory for Panasonic business projectors. It belongs to the long-throw category, with a throw ratio of 3.58-5.45:1, matching a 0.67 1DLP inch panel. The official compatibility list covers 30 models; before installation, simply check the body model and panel size — no adapter rings needed. The value of an original lens lies not in a few extra rows of specifications, but in the fact that it is calibrated at the factory to the optical path and bayonet mount of that series: once mounted, the image circle, edge uniformity and focus travel are all design values, so there is no need to compensate for picture quality with keystone correction.

I. Lens Specifications

Brand	Panasonic（Panasonic）
Lens model	ET-DLE350
Throw ratio	3.58-5.45:1
Product type	Long throw (Long Throw)
Compatible panel	0.67 1DLP inch
Models covered	30 units
Warranty	12 months; non-human damage can be handled through after-sales service, based on the date on the shipping document

The above specifications are subject to the original factory specifications. For mechanical dimensions, flange distance and mount type not shown in the specification table, please check with us using your body model — ordering directly based on a similar model carries the risk that the lens will not fit.

II. Converting Throw Ratio into Installation Distance

The throw ratio is the ratio of the installation distance to the image width. This original lens is a zoom lens (3.58-5.45:1), so the same image size corresponds to a range of distances; any position within that range will focus properly during installation.

Image size	Image width	Required installation distance
100 inch	2.15 m	approx. 7.70 – 11.72 m
120 inch	2.58 m	approx. 9.24 – 14.06 m
150 inch	3.22 m	approx. 11.55 – 17.58 m
200 inch	4.30 m	approx. 15.39 – 23.43 m

The above is the clear distance from the front face of the lens to the screen, excluding the space needed for rear cooling and cabling. Calculated for a 16:10 aspect ratio; actual values should be confirmed by on-site measurement and the original manufacturer's manual.

Picture quality differs at the two ends of the zoom range: near the short end the image is brighter and the edges slightly softer; near the long end the edges are crisper and brightness drops slightly. Where the venue allows, it is recommended to position the lens in the middle of the range — after mounting, first find the sharpest position on the focus ring, then fine-tune the lens shift.

III. Compatible Models (30 units)

The table below is taken from the original factory compatibility list; brightness and resolution are filled in from the model database, and entries that could not be retrieved are marked "—" without speculation.

Model	Brightness	Resolution
PT-FRZ580C	5400 lumens	WUXGA,1920 x 1200
PT-FRZ680C	6200 lumens	WUXGA,1920 x 1200
PT-FRZ99C	10000 lumens	WUXGA,1920 x 1200
PT-FRZ78C	7200 lumens	WUXGA, 1920 x 1200
PT-FRW73C	7200 lumens	WXGA, 1280 x 800
PT-FRZ89C	8800 lumens	WUXGA,1920 x 1200
PT-FRZ79C	7200 lumens	WUXGA,1920 x 1200
PT-FRZ69C	6200 lumens	WUXGA,1920 x 1200
PT-FRZ98C	10000 lumens	WUXGA, 1920 x 1200
PT-FRW93C	10000 lumens	WXGA, 1280 x 800
PT-FRX110C	11000 lumens	WUXGA,1920 x 1200
PT-FRZ575C	—	—
PT-FRQ100C	10000 lumens	WQXGA 2715 x1697
PT-FRZ120C	12000 lumens	WUXGA,1920 x 1200
PT-FRZ88C	8800 lumens	WUXGA, 1920 x 1200
PT-FRQ080C	8000 lumens	WQXGA 2715 x1697
PT-FRZ86C	8600 lumens	WUXGA, 1920 x 1200
PT-FRQ86C	8600 lumens	4K, 3840 x 2160
PT-FRZ76C	—	—
PT-RCQ10	10000 lumens	WQXGA 2715 x1697
PT-RCQ80	8000 lumens	WQXGA 2715 x1697
PT-RZ120	12000 lumens	WUXGA,1920 x 1200
PT-RZ990	9400 lumens	WUXGA,1920 x 1200
PT-RZ890	8500 lumens	WUXGA,1920 x 1200
PT-RZ790	7000 lumens	WUXGA,1920 x 1200
PT-RZ690	6000 lumens	WUXGA,1920 x 1200
PT-RQ7L	7500 lumens	4K, 3840 x 2160
PT-RQ6L	6500 lumens	4K, 3840 x 2160
PT-RZ7L	7500 lumens	WUXGA, 1920 x 1200
PT-RZ6L	6500 lumens	WUXGA, 1920 x 1200

For models not on the list, please send us a photo of the nameplate on the body and the existing lens so we can verify compatibility — platforms of the same generation often share a mount, but the risk of ordering on the basis of a similar model name is not worth taking.

Throw Ratio by Model Series

The rated throw ratio of the same ET-DLE350 differs across the series listed below, so the value should be selected according to the series the actual body belongs to.

Model series	Throw ratio
—	3.58-5.45:1

IV. Three Things to Confirm Before Replacement

• Make sure the panel size matches. ET-DLE350 is designed for a 0.67 1DLP inch panel. Machines with a different panel size, or a different resolution, will develop problems with the image circle and edge uniformity even if the mount physically fits.
• Calculate the installation distance first. This lens has a rated throw ratio of 3.58-5.45:1; use the table in Section II to map it onto your venue dimensions. A fixed-focus lens leaves no margin, and even a zoom lens needs 10–20 cm of allowance at both ends.
• Verify the mount and the lock. An original lens is calibrated to the mount of that series, and you must hear the lock click into place after mounting; a skewed image or soft edges is usually caused by an incompletely locked mount, not by the lens itself.

If you are unsure, take one photo of the body nameplate and one of the current lens nameplate and send them to us — verification against the actual items is the safest approach.