Christie 03-000808-25P OEM Replacement Lamp for CX67-100U, RPMX-100U, CX50-100U, CX60-100U

The 03-000808-25P is a lamp module that remains widely used on Christie projectors, covering 4 models. This guide presents the lamp module specifications, substitution criteria, model compatibility list, and pre-replacement checks in one place.

1. Lamp Module Specifications

The above parameters are taken from the Zorsika product database. Contact sales for the complete technical specifications.

2. Can It Be Substituted? Check These 3 Physical Parameters First

The key catalogued specification of this lamp is: power 100W / 120W. Whether it can be used as a substitute depends on whether these three or four specifications match those of the OEM lamp item by item: power determines whether the lamp driver board can drive it, reflector size determines whether it fits into the lamp housing, and the socket and arc gap determine whether it will light.

Same wattage does not mean universal fit. Many models on the market have the same power rating but differ in reflector size by several millimeters. Forcing installation may prevent the lamp cover from closing, shift the optical axis, or obstruct the cooling airflow. Conversely, if the reflector is the same but the power rating differs, the lamp driver board may report an error or fail to light the lamp. Therefore, assess compatibility in this order: first match the OEM lamp module model, then verify the power rating and reflector size, and finally check the socket configuration.

This lamp is used in projectors with DLP panels. Different panel technologies have different requirements for the lamp arc position. Substituting a lamp across panel technologies may fit physically but still result in uneven brightness distribution and is therefore not recommended.

Standard Mode and Eco Mode

Dual power refers to the two drive-power levels supported by the lamp module. Whether switching is available depends on the projector menu, and not all models offer an eco setting.

3. Compatible Projector Models (4 Models, Christie)

The following compatible projector models have been verified for the 03-000808-25P on Christie projectors:

CX67-100U, RPMX-100U, CX50-100U, CX60-100U

The list contains verified models and is not exhaustive. Projectors from the same generation often share the same lamp module. For models not listed, send photos of the projector nameplate and original lamp label to us for confirmation.

4. Confirm 3 Things Before Replacement

1. Check the nameplate model: Open the lamp door and confirm that the model on the lamp module label exactly matches 03-000808-25P. Some Christie models have suffixes such as -V and +, while lamp modules are generally interchangeable. If you are unsure, send us a photo of the nameplate for confirmation.
2. Confirm the lamp configuration: The same model is available in four variants: original packaged, OEM bare, compatible replacement, and used, with substantial differences. The OEM bare option pairs an original arc tube with a third-party housing and generally offers the best overall value. Specify the required option when ordering to avoid disputes after delivery.
3. Check the physical specifications: These specifications must match the original lamp. If any one differs, the lamp may not fit or may fail to light.

5. Choosing Between Zorsika PRO and Common Alternatives

Zorsika PRO Series projector lamps are built around “OEM specifications and in-house quality control”: key parameters are matched item by item against the OEM, every lamp is tested to confirm that it lights before shipment, and each is ready to install without structural modifications.

OEM parts offer exact consistency but at a higher overall cost. Other replacement parts are cheaper, but their arc tube sources and quality control are inconsistent. Common problems include low brightness, a greenish color temperature, and noticeable light decay after a period of use. Zorsika takes a middle path: OEM-matched specifications, in-house quality control, and a more hassle-free overall solution.

Brightness and service life are strongly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make a uniform numerical guarantee; before bulk procurement, test one or two lamps first to confirm that they light.

6. FAQ

Q: My projector is not among the 4 models listed. Can I use the 03-000808-25P?

A: The list contains verified models and is not exhaustive. Christie products from the same generation often share the same lamp module. Send photos of the projector nameplate and original lamp label to the Zorsika technical team, who can help confirm whether the lamp is compatible.

Q: How do I choose between original packaged, OEM bare, and compatible replacement?

A: If consistent brightness and long-term reliability are your priorities, choose Zorsika PRO Series lamps. They are matched item by item to OEM specifications, individually tested to confirm that they light before shipment, benchmarked against OEM performance, backed by a 180-day warranty, and offer a more hassle-free overall experience. For routine commercial, educational, and meeting-room use, the PRO Series is also easier to manage overall. Other replacement lamps cost less, but their arc tube sourcing and quality control vary significantly, creating greater risks of brightness decay and shortened service life. They are recommended only for temporary backup projectors.

Q: Why choose Zorsika PRO instead of an OEM lamp?

A: The core proposition of Zorsika PRO Series projector lamps is “OEM specifications and in-house quality control.” Power, arc gap, and reflector size are matched item by item to the OEM, while every lamp receives an additional lighting test before shipment and is backed by a 180-day warranty. Compared with OEM parts, they offer a more hassle-free overall option; compared with other replacement solutions, they provide more consistent quality control.

Q: What should I do if the projector reports that the lamp is not recognized after replacement?

A: First confirm whether the lamp-hour counter has been reset. Most such prompts are caused by an uncleared timer. If the error persists after the reset, contact Zorsika technical support. We provide reset instructions and troubleshooting guidance for the corresponding projector model.

Q: How long is the lamp warranty?

A: Zorsika PRO Series projector lamps come with a 180-day warranty. Normal use without user fault, including cases such as lamp rupture or premature abnormal light decay, is eligible for after-sales service. Brightness degradation within the standard range is considered normal wear and is not covered by the warranty.

Related Search Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database