Christie 03-000754-02P Projector Lamp for AVIVID LX25 VIVID LX25A

The 03-000754-02P is a lamp module still widely used in Christie projectors, covering 2 models. This article consolidates the module specifications, compatibility assessment, model list, and pre-replacement checks.

1. Lamp Module Specifications

These specifications are taken from the Zorsika product database. Contact our sales team for the complete technical datasheet.

2. Can It Serve as a Substitute? Check These 3 Physical Specifications

The core catalogued specifications for this lamp are reflector size 52X56L and arc gap 1.0mm. Whether it can serve as a substitute depends on whether these 3–4 specifications match the original lamp item by item: power determines whether the lamp driver board can drive it, reflector size determines whether it fits in the lamp housing, and socket and arc gap determine whether it will light up.

Same power does not mean universal compatibility. Many models on the market have the same power rating but differ in reflector size by several millimeters. Forced fitting may prevent the lamp compartment cover from closing, shift the optical axis, or block the cooling airflow. Conversely, even if the reflector size is identical, a different power rating may cause the lamp driver board to report an error or fail to light the lamp. The assessment order should be: identify the original lamp module model, verify the power rating and reflector size, and finally check the socket configuration.

This lamp is used in LCD projector models. Different panel technologies have different requirements for positioning the arc within the optical path. Even if a substitute lamp from a different panel technology fits, uneven brightness distribution may occur, so such use is not recommended.

3. Compatible Models (2 Models, Christie)

The following compatible models for the 03-000754-02P have been verified on Christie projectors:

AVIVID LX25, VIVID LX25A

The list contains verified models and is not exhaustive. Projectors from the same generation often share the same lamp module. For models not listed, send us photos of the projector nameplate and the original lamp label for confirmation.

4. Confirm These 3 Items Before Replacement

1. Verify the nameplate model: Open the lamp door and confirm that the model on the lamp module label exactly matches 03-000754-02P. Some Christie models have suffixes such as -V and +, and lamp modules are generally shared across these versions. If you are uncertain, send us a photo of the nameplate for confirmation.
2. Confirm the lamp configuration: The same model is available in 4 configurations: OEM packaged, bare OEM, aftermarket replacement, and used. The differences can be substantial. A bare OEM configuration uses an original arc tube with a third-party lamp holder and generally offers the best overall value. Be sure to specify the required configuration when ordering to avoid disputes after delivery.
3. Verify the physical specifications: Reflector size 52X56L and arc gap 1.0mm must match the original lamp. If any item does not match, the lamp may not fit or may not light up.

5. Choosing Between Zorsika PRO and Other Alternatives

Zorsika PRO Series projector lamps follow the principle of “OEM specifications, in-house quality control”: critical specifications are matched item by item against the OEM originals, every lamp is tested to confirm that it lights up before shipment, and the lamps are ready for installation without structural modifications.

OEM parts offer exact compatibility, but at a higher overall cost. Other aftermarket lamps are less expensive, but their arc tube sourcing and quality control are inconsistent. Common problems include low brightness, a green color temperature, and noticeable brightness depreciation after extended use. Zorsika takes the middle path: OEM-matched specifications, in-house quality control, and a more hassle-free overall experience.

Brightness and service life are strongly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make blanket numerical guarantees, so it is recommended to test 1–2 lamps before placing a bulk order.

6. Frequently Asked Questions

Q: My projector is not among the 2 models listed. Can I use 03-000754-02P?

A: The list contains verified models and is not exhaustive. Christie projectors from the same generation often share the same lamp module. Send photos of the projector nameplate and the original lamp label to the Zorsika technical team, who can confirm whether it is compatible.

Q: How should I choose between OEM packaged, bare OEM, and aftermarket lamps?

A: If you prioritize stable brightness and long-term reliability, choose a Zorsika PRO Series lamp. Each lamp is matched item by item against the OEM specifications and tested to confirm that it lights up before shipment, providing OEM-level performance with a more hassle-free overall experience and a 180-day warranty. For routine commercial, educational, and meeting-room applications, the PRO Series is also the more convenient choice overall. Although other aftermarket lamps cost less, their arc tube sourcing and quality control vary considerably, creating greater risks of brightness degradation and shortened service life. They are recommended only for temporary backup projectors.

Q: Why choose Zorsika PRO instead of an OEM lamp?

A: The core principle of the Zorsika PRO Series is “OEM specifications, in-house quality control.” Power, arc gap, and reflector size are matched item by item against the OEM specifications, with the added benefit of an individual lamp-on test before shipment and a 180-day warranty. It offers a more hassle-free experience overall than OEM products and more consistent quality control than other alternatives.

Q: What should I do if the projector reports that the lamp is not recognized after replacement?

A: First, confirm whether the lamp hours have been reset, as most warnings are caused by an uncleared timer. If the error persists after resetting, contact the Zorsika technical team. We provide lamp-hour reset instructions and troubleshooting guidance for the corresponding projector model.

Q: How long is the lamp warranty?

A: Zorsika PRO Series projector lamps include a 180-day warranty. After-sales service is available for normal use without accidental damage, such as lamp rupture or abnormal early brightness depreciation. Brightness degradation within the standard range is considered normal wear and is not covered by the warranty.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog