Christie 03-000712-01P Projector Lamp for LX32 LX32 LX34 – OEM Replacement

03-000712-01P is a lamp module that remains widely deployed in Christie projectors and supports 2 models. This guide presents the lamp module specifications, compatibility assessment, model compatibility list, and pre-replacement checks all in one place.

I. Lamp Module Specifications

These specifications are sourced from the Zorsika product database. Contact our sales team for the complete technical specification sheet.

II. Can It Serve as a Substitute? Check These Three Physical Specifications First

The lamp's core catalog specifications are: power 250W, reflector size 80X80L, and arc gap 1.35mm. Whether it can serve as a substitute depends on whether these specifications match those of the original lamp item by item—power determines whether the lamp driver board can drive it, reflector size determines whether it fits inside the lamp housing, and the socket/base and arc gap determine whether it will light.

Equal wattage does not mean universal compatibility. Many lamp models on the market have the same wattage but reflector sizes that differ by several millimeters. Forcing such a lamp to fit may cause the housing cover not to close, the optical axis to shift, or the cooling airflow to be obstructed. Conversely, even if two lamps have the same reflector size, differences in power may cause the lamp driver board to report an error or the lamp to fail to light. The assessment order should therefore be: first identify the original lamp module model, then verify the power and reflector size, and finally check the socket/base design.

This lamp is used in projectors with LCD panels. Different panel technologies have different optical path requirements for the lamp arc position. Even if a substitute lamp from a different panel technology fits, it may produce uneven brightness distribution, so this type of substitution is not recommended.

III. Compatible Models (2 Models, Christie)

The following compatible projector models have been verified for 03-000712-01P in Christie projectors:

LX32, LX34

This list contains verified models and is not exhaustive. Projectors from the same generation often share the same lamp module. For models not included in the list, send us photos of the projector nameplate and original lamp label for confirmation.

IV. Three Checks Before Replacement

1. Verify the nameplate model: Open the lamp door and confirm that the model on the lamp module label exactly matches 03-000712-01P. Some Christie models have suffixes such as -V and +, and the lamp modules are generally interchangeable. If you are uncertain, send us a photo of the nameplate for confirmation.
2. Confirm the lamp format: The same model is available in four formats: original packaged, original bare, aftermarket replacement, and used, with significant differences among them. An original bare lamp consists of an OEM arc tube fitted with a third-party housing and generally offers the best overall value. Be sure to specify the required format when placing your order to avoid disputes after delivery.
3. Verify the physical specifications: The reflector size of 80X80L, arc gap of 1.35mm, and these specifications must match those of the original lamp. Any mismatch may prevent the lamp from fitting or lighting up.

V. Choosing Between Zorsika PRO and Other Alternatives

Zorsika PRO Series projector lamps follow the principle of "OEM specifications and in-house quality control": critical specifications are benchmarked item by item against the OEM, every lamp is tested to confirm that it lights before shipment, and it can be installed and used immediately without structural modifications.

The advantage of an OEM part is exact consistency, but its drawback is a higher overall cost. Other aftermarket lamps are less expensive, but their arc tube sources and quality control are less consistent. Common problems include low brightness, a greenish color temperature, and noticeable light depreciation after a period of use. Zorsika takes the middle path: OEM-matched specifications, in-house quality control, and a more hassle-free overall experience.

Brightness and service life are strongly affected by the condition of the projector, operating environment, and cooling conditions. Zorsika does not provide a uniform numerical guarantee. Before placing a bulk order, we recommend obtaining 1 or 2 lamps for lighting tests.

VI. Frequently Asked Questions

Q: My projector is not among the 2 models listed. Can I use 03-000712-01P?

A: This list contains verified models and is not exhaustive. Christie products from the same generation often share the same lamp module. Send photos of the projector nameplate and original lamp label to Zorsika Technical Support, and we can help determine whether the lamp is compatible.

Q: How should I choose between an original packaged lamp, an original bare lamp, and an aftermarket replacement?

A: If you prioritize brightness stability and long-term reliability, choose a Zorsika PRO Series lamp—each specification is matched to the OEM, every lamp is tested to confirm that it lights before shipment, performance is benchmarked against the OEM, the overall experience is more hassle-free, and a 180-day warranty is included. For routine commercial education and conference-room use, the PRO Series also provides a more hassle-free overall experience. Although other replacement lamps cost less, their arc tube sources and quality control vary considerably, creating greater risks of brightness depreciation and shortened service life. They are recommended only for temporary backup projectors.

Q: Why should I choose Zorsika PRO instead of an OEM lamp?

A: The core principle of the Zorsika PRO Series is "OEM specifications and in-house quality control": power, arc gap, and reflector size are benchmarked item by item against the OEM, while every lamp receives an additional lighting test before shipment and is covered by a 180-day warranty. It offers a more hassle-free overall experience than the OEM and more consistent quality control than other alternatives.

Q: What should I do if the projector reports that the lamp is not recognized after replacement?

A: First confirm whether the lamp-hour counter has been reset, as most such warnings are caused by an uncleared timer. If the error remains after resetting, contact Zorsika Technical Support. We provide reset procedures and troubleshooting guidance for the corresponding projector model.

Q: How long is the lamp warranty?

A: Zorsika PRO Series projector lamps are covered by a 180-day warranty. After-sales service is available for normal use without damage caused by human intervention, such as lamp rupture or abnormal early light depreciation. Brightness degradation within the standard range is considered normal wear and is not covered by the warranty.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog